Wheels - V-Groove Wheels - AIE Company, inc.
Site Map Contact UsHome Page
 Toll Free Phone:  800-229-2431
Toll Free Fax:  888-993-3243

Local Phone:  770-263-6118  :  Local Fax:  770-242-0114
Email:  Info@AIECasters.com
 

Wheels - V-Groove Wheels

Colson V-Groove Wheels

Colson

V-Groove

For track or floor operation on inverted angle iron track in production lines. Also used with hand or conveyor trucks. Wheels are cast with reinforced section at maximum stress points. V-Groove surface and face are machine finished. These wheels handle loads from 800 to 6,000 lbs. per wheel. Designed for floor operation, or for track mounted flush or on top of floors.

  • Temperature range: -45F to +180F. If metal washers specified: -45F to +500F (Roller bearing only).
  • Finish: Green alkyd enamel.
view catalog 
   
Albion Drop Forged Steel VF/VH V-Groove Wheels

Albion

Drop Forged Steel VF/VH V-Groove Wheels

Wheel face and V-groove are machined from drop forged steel. A relief groove at the base of the V tends to equalize the load to each face of the angle track when in operation. Wheel face and bore are machined for concentricity to proper tracking. These wheels can be used not only on a track but flat surfaces as well. VH wheels feature a larger bore for greater capacity.

  • Please note: Track alignment is critical when utilizing v-groove wheels.
  • Wheel face: V-Groove
  • Finish: Clear
  • Note: Select bearings featured are recommended for standard applications. For special applications or alternate bearings consult factory.
  • For customization & special application options, please consult factory.
view catalog 
   
Durable Ductile V-Groove Wheels

Durable

DUCTILE V-GROOVE

  • Made specifically for use on inverted angle iron track; they can also be used on flat surfaces.
  • Each wheel has a precisely machined 90 V-groove with relief groove which enables load equalization.
  • Ductile steel is a combination of special alloys that give it higher weight capacities than cast iron, and is more economical than drop forged steel; also referred to malleable iron; material may flex rather than cracking or breaking when submitted to an extreme shock load.
  • Extra thick walled, heavy-duty core, hub & tread face.
  • Precision & tapered bearings maximize mobility and performance in towing and severe use environments.
  • Tensile strength of 45,000 PSI.
  • Temperature range: -45 F to 800 F.
view catalog 
   
Albion XV Polyurethane V-Groove Wheels

Albion

XV Polyurethane V-Groove Wheels

Wheel face and V-groove are machined from heavy duty polyurethane. A relief groove at the base of the V tends to equalize the load to each face of the angle track when in operation. Wheel face and bore are machined for concentricity to proper tracking. These wheels can be used not only on track but flat surfaces as well.

  • Hardness: 60 Shore D
  • Wheel Face: V-groove
  • Finish: Green
  • Note: Select bearings featured are recommended for standard applications. For special applications or alternate bearings consult factory.
  • For customization & special application options, please consult factory.
view catalog 
   
Albion Trionix V-Groove Wheels (NV)

Albion

Trionix™ V-Groove Wheels (NV)

Albion Trionix™ (NX) high impact polymer wheels are the definition of heavy duty wheels. These wheels are machined, instead of molded, giving them added strength. Our NX wheels deliver high performance, capacity, slide resistance and excellent rollability. Trionix™ features unique polymers that resist corrosion and most chemicals.

  • Wheel Face: V-Groove
  • Finish: Black
  • Temperature Range: -30F to 220F
view catalog