2 wheel steel handtrucks to 500 pounds by AIE Company Inc.
Site Map Contact UsHome Page
 Toll Free Phone:  800-229-2431
Toll Free Fax:  888-993-3243

Local Phone:  770-263-6118  :  Local Fax:  770-242-0114
Email:  Info@AIECasters.com
 

2 wheel Hand trucks - Steel to 500 pound Capacity

 

The Fairbanks Company Trash Container B3079-5SR

The Fairbanks Company

Trash Container/B3079-5SR

The answer to moving light containers. The center chime hook alone with the curved cross straps securely hold round containers such as small drums, barrels and garbage cans. The 16' wide, 1" x 16 gage round tubular frame is also ideal for wide cartons. The rear handle brace protects handle when in horizontal position. Furnished with 5" x 1 1/2" solid rubber wheels only. Green epoxy powder coated all welded construction.

  • Robotic welded tor greater consistency
  • Green epoxy powder coated for a longer lasting finish
  • Rugged roller bearing wheels for longer wear
  • Capacity: up to 250 lbs
  • Weight: 20lbs
view catalog 
   
Harper Continuous Frame, Dual Pin Handle

Harper

Continuous Frame, Dual Pin Handle

*Continuous Frame For High Stack Capabilities.*Dual Handle For Two Hand Load Control. *Curved Steel Straps Welded Front And Back Allows For Cylindrical Object Handling. *8-Gauge High Strength Steel Base Plate With Machine Beveled Edge To Slide Under The Load Easier And Rounded Corners For Safety. *Stair Glides Ease Load Up Or Down Stairs And Over Curbs. *'Tri-Hole' Axle Bracket For Choice Of 6'', 8'' Or 10'' Wheels.

  • Wheel Type: 10'' X 2 1/4'' Solid Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 50 1/2''
  • Width: 19 3/4''
  • Frame Cap: 500 LBS
  • 10'' X 2 1/4'' Solid Rubber
  • Model: 54T86
   
   
Harper Continous Frame, Pin Handle

Harper

Continuous Frame, Pin Handle

*Continuous Frame For High Stack Capabilities.*Pin Handle For One Handed Load Control. *Curved Steel Straps Welded Front And Back Allows For Cylindrical Object Handling. *8-Gauge High Strength Steel Base Plate With Machine Beveled Edge To Slide Under The Load Easier And Rounded Corners For Safety. *Stair Glides Ease Load Up Or Down Stairs And Over Curbs. *'Tri-Hole' Axle Bracket For Choice Of 6'', 8'' Or 10'' Wheels.

  • Wheel Type: 8'' X 2'' Solid Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 45 1/2''
  • Width: 19''
  • Model: 54T85
view catalog
 
Harper Continuous Frame, Loop Handle

Harper

Continuous Frame, Loop Handle

*Continuous Frame For High Stack Capabilities. *Loop Handle For Push, Pull Or Lift Options. *Curved Steel Straps Welded Front And Back Allows For Cylindrical Object Handling. *8-Gauge High Strength Steel Base Plate With Machine Beveled Edge To Slide Under The Load Easier And Rounded Corners For Safety. *Stair Glides Ease Load Up Or Down Stairs And Over Curbs. *'Tri-Hole' Axle Bracket For Choice Of 6'', 8'' Or 10 Wheels.

  • Wheel Type: 10'' X 1 5/8'' Mold On Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 50 1/2''
  • Width: 18''
  • Frame Cap: 500 LBS.
  • Model: 59T60
view catalog
   
Harper Dual Loop Handle, Tall Steel Hand Trucks

Harper

Dual Loop Handle, Tall Steel Hand Trucks

*56'' Height For Greater Stacking Capabilities.* Dual Loop Handle For Two Handed Control. *Center Tube Is Connected To The Base.*1 1/4'' Steel Tube Frame. *Stair Glides Are Channeled To Increase Strength. It'S Flat Wide Surface Helps Ease Loads Over Curbs. *1/4'' Steel Base Plate Has Machine Beveled Leading Edge And Rounded Corners For Safety. *Available With 8'' Or 10'' Wheels. See Wheel Section - 5/8'' Bore For Other Wheel Options. *26'' Folding Nose Extension Is Optional (Part Number Ct8En26)For 8'' Wheels. (Part Number H59En26) For 10'' Wheels. *Available Without Center Tube By Adding 'C' To The Part Number (Example: Ctdc14)

  • Wheel Type: 8'' X 2 1/4'' Solid Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 56''
  • Width: 17''
  • Frame Cap: 500 LBS.
  • Model: CTD14
view catalog
 
Harper Loop Handle Tall Steel

Harper

Loop Handle Tall Steel

*56'' Height For Greater Stacking Capabilities.* Single Loop Handle For Easy Load Control. *Center Tube Is Connected To Base. *1 1/4'' Steel Tube Frame. *Truck Shown With Optional 'Ctg' Stair Glide For 10'' Wheels Only. *Stair Glide Is Channeled To Increase Strength. It'S Flat Wide Surface Helps Ease Loads Over Curbs. *1/4'' Steel Base Plate Has Machine Beveled Leading Edge And Rounded Corners For Safety. *Available With 10'' Wheels Only. *See Wheel Section - 5/8'' Bore For Other 10'' Wheel Options With 2 1/4'' Bore. *Fenders Prevent Load From Rubbing Against Wheels.

  • Wheel Type: 10'' X 3.5'' Pneumatic
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 56''
  • Width: 19''
  • Frame Cap: 500 LBS.
  • Model: CTL16
view catalog
   
Harper Pin Handle Tall

Harper

Pin Handle Tall

*56'' Height For Great Stacking Capabilities.* Single Pin Handle For One Handed Load Control. *Center Tube Is Connected To Base. *1 1/4'' Steel Tube Frame. Stair Glide Is Channeled To Increase Strength. It'S Flat Wide Surface Helps Ease Load Over Curbs. *1/4'' Steel Base Plate Has Machine Beveled Leading Edge And Rounded Corners For Safety. *Truck Shown Here With Optional Ct8En26 Nose Extension. (Part Number For Nose Extension For 10'' Wheel Is H59En26) Fenders Prevent Load From Rubbing Against Wheels. *Available With 8'' Or 10'' Wheels. *See Wheel Section - 5/8'' Bore For Other Wheel Options.

  • Wheel Type: 8'' X 2: Mold On Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 56''
  • Width: 17''
  • Frame Cap: 500 LBS.
  • Model: CTP85
view catalog
   
Harper Continuous Handle

Harper

Continuous Handle

*Continuous Handle For Easy Load Control.*Curved Steel Straps Welded Front And Back Allows For Cylindrical Object Handling.*8-Gauge High Strength Steel Base Plate With Machine Beveled Edge To Slide Under Load Easier And Rounded For Safety. *Stair Glides Ease Load Up Or Down Stairs And Over Curbs. *'Tri-Hole' Axle Bracket For Choice Of 6'', 8'' Or 10'' Wheels.

  • Wheel Type: 10'' X 3.5'' Pneumatic
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 50''
  • Width: 21 1/4''
  • Frame Cap: 500 LBS.
  • Model: 52TK19
view catalog
   
Wesco Freight King Hand Trucks

Wesco

Freight KingŪ Hand Trucks

  • 48" O.A.H. / 18.5" O.A.W.
  • Replaceable hardwood handles are essential for use in cold environments
  • Frame made from one piece heavy gauge pressed steel
  • Frame is reinforced at critical points
  • Bolted construction for easy parts replacement
  • Beveled open 5" or 8" nose is made of .5" thick steel
  • Legs on T-2 frames prevent handle damage and allow horizontal loading
  • Red enamel finish
  • Curved handles
  • 6" x 1.5" cast iron center moldon rubber wheels with .75" ball bearings
  • 450 lb capacity
view catalog
   
Harper Dual Handle

harper

Dual Handle

*Dual Handle For Two Hand Load Control. *Curved Steel Straps Welded Front And Back Allows For Cylindrical Object Handling. *8-Gauge High Strength Steel Base Plate With Machine Beveled Edge To Slide Under The Load And Rounded For Safety. *Stair Glides Ease Load Up Or Down Stairs And Over Curbs. *'Tri-Hole' Axle Bracket For Choice Of 6'', 8'' Or 10'' Wheels.

  • Wheel Type: 10'' X 2.5'' Solid Rubber
  • Axle: 5/8''
  • Base Plate: 7'' X 14''
  • Height: 50''
  • Width: 20''
  • Frame Cap: 500 LBS.
  • Model: 50T86
view catalog
   
Harper Stair Crawler Kit

Harper

Stair Crawler Kit

*Will Work On Any 800 Lb. Or 500 Lb. Industrial Truck With 10'' Wheels And Channel Stair Glides. *Eases Load Up And Down Stairs And Over Curbs. *Easy Assembly.

  • Product Class: IRP
  • Model: FAP SCT
  • UPC Code: 0-53417-01879-3