dock steel boards by AIE Company Inc.
Site Map Contact UsHome Page
 Toll Free Phone:  800-229-2431
Toll Free Fax:  888-993-3243

Local Phone:  770-263-6118  :  Local Fax:  770-242-0114
Email:  Info@AIECasters.com
 

Dock Equipment - Steel Dock Boards/Dock Plates

Bluff Steel Dock Board (T)

Bluff

Steel Dock Board (T)

This heavy-duty steel dock board is held in position using two 1" stress-proof steel pins. When properly placed in the side pocket location holes, these pins hold the dock board firmly in place guarding against slippage. Simply select the proper pin hole location for use with conventional, refrigerated, or container trailers, or for below dock conditions. Widths from 60" to 84".

  • All-welded steel construction
  • Capacities from 15,000 to 40,000 pounds
  • Two four-hole pin pockets placed on each edge
  • Fold-down lifting loops
view catalog
   
Bluff Steel Dock Board (TFL)

Bluff

Steel Dock Board (TFL)

Same basic design as the "T" dock boards but uses locking legs in lieu of steel pins.

  • NOT RECOMMENDED FOR BELOW DOCK LOADING.
view catalog
   
Bluff Steel Dock Board (TFL-SB) Speedy Board

Bluff

Steel Dock Board (TFL-SB) Speedy Board™

"T" Designed board with the "fix leg" option. Add the "Speedy-BoardTM" option for fork cutouts on the leading edge of the board. This allows your driver to "scoop" the board and move into place as well as retrieve for storage when the job is done. All of this WORK is done without leaving the safety of the forktruck cage. **SB Option can be added to TFL, TNB and SC boards at no charge.

  • NOT RECOMMENDED FOR BELOW DOCK LOADING.
view catalog
   
Bluff Steel Dock Board (TNB)

Bluff

Steel Dock Board (TNB)

Single-bend dock board design utilizes the lifting chain and full width locking legs.

  • NOT RECOMMENDED FOR BELOW DOCK LOADING.
view catalog
   
Bluff Steel Dock Board (SC)

Bluff

Steel Dock Board (SC)

This economical steel dockboard with all welded steel curbs, locking legs and lifting chains is designed for use with 3,000 pound forklift (10,000# model) and 4,000 pound forklift (13,000# model). Available in widths of 60" & 72".

  • All welded steel construction
  • Lifting chains included
  • Capacities of 10,000 & 13,000 pounds
view catalog
   
Bluff Red Pin Steel Dock Board (C)

Bluff

Red Pin Steel Dock Board (C)

The red pin dockboard utilizes full length side pockets along with two locking pins for each side. These pins provide safe loading conditions for container and park - out applications. Widths from 60" to 84". Lengths from 48" to 96".

  • For difficult trailer-to-dock positions
  • Dual-pin locking system
  • All-welded steel construction
  • Capacities from 15,000 to 40,000 pounds
view catalog
   
Bluff Speedy Board

Bluff

Speedy Board®

Here we take the steel “T” board design and “kick it up a notch” or two to create the “Speedy Board®. Fork cutouts are added to the leading edge of the board, allowing your driver the ability to "scoop" the board and move it into place and to retrieve it for storage when the job is done. This work is all accomplished without the driver leaving the safety of the forktruck cage. The Speedy Board®(SB) Option can be added to TFL, TNB and SC boards at no charge.

  • The use of the Speedy Board®is NOT recommended for below dock loading.
  • Manufactured and Tested in Compliance with ANSI Standard MH30.2.
view catalog