Dock Accessories by AIE Company Inc.
Site Map Contact UsHome Page
 Toll Free Phone:  800-229-2431
Toll Free Fax:  888-993-3243

Local Phone:  770-263-6118  :  Local Fax:  770-242-0114
Email:  Info@AIECasters.com
 

Dock Equipment - Crash Guard Safety Rails

Bluff Crash Guard Safety Rails

Bluff

Crash Guard Safety Rails

Crash Guard safety rails install in minutes with ordinary hand tools and concrete drill. Safety rail systems protect personnel, machinery, building structures, in-plant offices, aisle ways, electrical panels, tool cribs, conveyors, finished products, receiving docks, cooling equipment, and parking areas.

  • Formed 10 gauge steel rails made in lengths up to 12'
  • Rails can withstand impacts of 10,000 pounds traveling at 4 miles per hour
  • Structural steel posts have open sides for easy assembly
  • Base plates are 10" square x 5/8" thick steel
  • Fasteners are included
  • Rounded top rails will prevent injuries and provide added personnel protection
view catalog 

Dock Equipment - Wheel Risers

Bluff Steel Wheel Risers (SWR)

Bluff

Steel Wheel Risers (SWR)

Wheel risers allow trucks and semi trailers to be positioned properly above loading docks for more efficient loading and unloading of freight. Widths of 18" and 24". Lengths to accommodate both single, dual, or tandem axle trailers. Wheel risers can be portable or permanently positioned. Custom sizes available. Steel Wheel Risers offer 40,000 lb capacity per pair and have (4) tabs with 9/16" holes for anchoring. Fork pockets in place of tabs are available at no additional cost.

  • Wheel Risers Eliminate unsafe, below dock loading conditions
  • Wheel Risers Reduce damage to loading dock equipment
  • Heights up to 12"
view catalog
   
Bluff Aluminum Wheel Risers (AWR)

Bluff

Aluminum Wheel Risers (AWR)

Wheel risers allow trucks and semi trailers to be positioned properly above loading docks for more efficient loading and unloading of freight. Widths of 18" and 24". Lengths to accommodate both single, dual, or tandem axle trailers. Wheel risers can be portable or permanently positioned. Custom sizes available. Aluminum Wheel Risers offer 30,000 lb capacity per pair and have cutouts for lifting by hand. Tabs in place of cutouts can be added at no additional cost.

  • Wheel Risers Eliminate unsafe, below dock loading conditions
  • Wheel Risers Reduce damage to loading dock equipment
  • Heights up to 12"
view catalog
   

Dock Equipment - Accessories

Vestil Rubber Wheel Chocks

Vestil

Rubber Wheel Chocks

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. Functional design is durable in all weather conditions. The Airline Chock is suitable for small and large aircraft. Includes a 36" polypropylene rope with handle and reflectors connected to chocks.

view catalog 
Vestil Aluminum Wheel Chocks

Vestil

Aluminum Wheel Chocks

Lightweight and easy to handle extruded aluminum chocks. Also available with a 36" high handle and/or sign.

view catalog 
Vestil Steel Wheel Chocks

Vestil

Steel Wheel Chocks

  • A) SWC-22 - Rugged all welded construction. Works in mud, sand or concrete.
  • B) MS-15 - Features grip slot for easy pick up and positioning.
  • C) SSC-17 - Slope design contours to truck wheel.
  • D) FAB-8 - Textured treadplate to provide maximum traction.
  • E) FAB-10 - Open face radius allows chock to be used with any size tire. Includes chain.
  • F) FAB-11 - Formed chock utilizes a saw tooth bottom for traction.
view catalog 
Vestil Molded urethane & Plastic Wheel Chocks

Vestil

Molded Urethane & Plastic Wheel Chocks

Made of a lightweight, yet durable, molded urethane. Available in four sizes: Mega, Jumbo, Standard and Mini.

view catalog 
Vestil Railroad Car Chocks

Vestil

Railroad Car Chocks

These Rail Chocks fit most standard size rails. Double side flanges keep chock(s) on track. Four hardened steel spurs, located on the bottom side of the chock, are used to maximize a non-slip positive grip. Handle projection 36". Handle height is 14". The support legs on some models are used to balance the flag rail chocks and are adjustable up to 14" in height. Aluminum "Chock Your Wheels" sign is visible from both sides. All welded steel construction provides for durability and long life. High-visibility safety yellow finish.

view catalog 
Vestil Wheel Chock Accessories

Vestil

Wheel Chock Accessories

  • Chain and Hangers - Discourage theft and misplacement of wheel chocks, and facilitate safety in the dock area. 15 foot chain attaches to the hanger. Hanger is then secured to the dock wall. Chain is fastened to the chock with cold shut.
  • Ergo-Handle - Ergonomically designed to make it easy to move wheel chocks in and out of position under trailer wheels. Reduce the risk of back, knee, and foot injuries. Factory installed only. Yellow powder coat finish. Not recommended with Urethane Wheel Chocks.
  • Wheel Chock Warning Signs - Warn truck drivers and dock workers to chock their wheels as required by law. Weather resistant. Bright red lettering provides high visibility. Sign has four mounting holes. Reflective sign is available for docks open at dawn and dusk. Signs and Vinyl Sticker measure 11"W x 9"H.
view catalog 
Vestil Laminated Dock Bumpers

Vestil

Laminated Dock Bumpers

Laminated style dock bumpers provide durable, economical protection for your loading dock and trailers. Units are constructed of fabric reinforced rubber from recycled truck tires. Pads are laminated between painted structural angles and held together with " steel tie rods. Installation is quick and easy by bolting or welding units to dock. Width is bolt hole center to bolt hole center. Bolt holes are 13/16" in diameter. Installation hardware available separately, see below. Recommended installation with laminated pads in vertical position as shown.

view catalog 
Vestil Extruded Rubber Bumper

Vestil

Extruded Rubber Bumper

  • Appropriate for outdoor or indoor protection
  • In-Plant wall protection from forklifts and other material handling vehicles.
  • Applications include Loading Docks, Parking Garages, and Marinas.
  • Contact factory for special lengths.
  • Installs easily
  • Resistant to all types of weather.
  • One piece construction.
  • Anchor bolts are easily installed through existing holes in dock.
view catalog 
Vestil Specialty Molded Bumpers

Vestil

Specialty Molded Bumpers

Manufactured from fiber reinforced prime rubber containing nylon and polyester, all models have predrilled, countersunk mounting holes for easy installation, and are drilled to accept 3/4" anchor bolts. Anchor bolts are easily installed through existing holes in dock.

  • Economical
  • Unique design and construction achieves high impact resistance and long life.
  • Immune to all weather conditions.
view catalog 
Vestil Hardened Molded Bumpers

Vestil

Hardened Molded Bumpers

These bumpers are excellent for virtually any application. Whether your use is for high traffic docks or In-plant wall protection, these very rugged bumpers are made to incur excessive friction and abrasion. Installation is easy -- 3/4" anchor bolts are installed through existing holes in dock.

  • Resistant to abrasion, friction, impact, wear and corrosion.
  • Impervious to weather damage
  • 2-piece construction fully assembled and ready for installation.
view catalog 
Vestil Trailer and Crane Bumpers

Vestil

Trailer and Crane Bumpers

Manufactured from fiber reinforced prime rubber containing nylon and polyester, all models have predrilled, countersunk mounting holes for easy installation, and are drilled to accept 1/2" anchor bolts.

  • Economical
  • Unique design and construction achieves high impact resistance and long life.
  • Immune to most weather conditions.
view catalog 
Vestil Bumper Stops

Vestil

Bumper Stops

Bumper Stops are excellent for protecting vehicles when the parking places are located right next to building walls.

  • Strong, durable, high impact resistant solid rubber bumper.
  • Utilize vertically or horizontally.
  • Optional recessed yellow and black caution stripe.
  • Special lengths available
view catalog 
Vestil Rubber Wedges

Vestil

Rubber Wedges:

  • Provides safety while stacking cylindrical objects
  • Smooth rubber extrusion reduces marring
  • Available in 4", 6", 12" & 24" lengths
view catalog
   
Vestil Folding Bulk Crate

Vestil

Folding Bulk Crate

  • These rugged containers will fold flat for storage when not needed
  • Overall size is 45" x 45" x 30"H
  • Usable size is 42" x 42" x 25"H
  • Volume capacity is 26 cu-ft
  • Overall height when folded flat is only 11"
  • Two-way fork entry openings are 33"W x 3"H
  • Uniform static load weight capacity is 6,000 lbs
  • Uniform dynamic load weight capacity is 2,000 lbs
  • Uniform stacking load weight capacity is 1,000 lbs
  • Multiple units may be stacked up to three (3) high
  • Manufactured from HDPE
  • Resistant to extreme high & low temperatures
view catalog
   

Cargo Equipment - Accessories

Ancra Cargo Bar Holder

Ancra

CARGO BAR HOLDER

Constructed of rust-resistant galvanized steel, the Ancra Cargo Bar Holder holds two heavyduty or standard-duty cargo bars. The Cargo Bar Holder has a locking mechanism and accommodates both 2" x 4" or 4" x 4" feet.

  • 49348-10 Weight: 6.875 lbs./3.11 kg.
   
Ancra Door Pull Straps

Ancra

DOOR PULL STRAPS

For pulling overhead and side doors and wheel carts. Rust protected galvanized steel clip is pre-punched for easy installation.

  • 49015-18: 18-in. Door Pull Strap. Weight: .20 lb./.09 kg.
  • 49015-24: 24-in. Door Pull Strap. Weight: .30 lb./.14 kg.
  • 49015-36: 36-in. Door Pull Strap. Weight: .40 lb./.18 kg.
   
Ancra Tie Offs - Series E and A Rope Tie Off

Ancra

TIE OFFS

A convenient way to attach rope or web to trailer side wall.

  • 40386-10 Series E and A Rope Tie Off. 3-piece end fitting for rope use with Series E or Series A Track. WLL: 1,000 lbs./454 kg. Weight: .30 lb./.14 kg.
   
Ancra Tie Offs - Series F Rope Tie Off

Ancra

TIE OFFS

A convenient way to attach rope or web to trailer side wall.

  • 40386-12 Series F Rope Tie Off. For rope use with Series F Track. WLL: 500 lbs./227 kg. Weight: .30 lb./.14 kg.
  • 40386-13 For rope use with Series F Track Canada. WLL: 500 lbs./227 kg. Weight: .30 lb./.14 kg.
   
Ancra Tie Offs - Series E and A Rope Tie Off

Ancra

TIE OFFS

A convenient way to attach rope or web to trailer side wall.

  • 40386-11 Series E and A Rope Tie Off. Spring actuated fitting for rope use with Series E or Series A Track. WLL: 1,000 lbs./454 kg. Weight: .40 lb./.18 kg.
   
Ancra Tie Offs - Series E and A Fitting with D-Ring

Ancra

TIE OFFS

A convenient way to attach rope or web to trailer side wall.

  • 49542-10 Series E and A Fitting w/ D-Ring. WLL: 1,000 lbs./454 kg. Weight: .34 lb./.15 kg.
   
Ancra Tie-Offs Series E and A Articulated Track Fitting

Ancra

TIE OFFS

A convenient way to attach rope or web to trailer side wall.

  • 47772-12 Series E and A Articulated Track Fitting. WLL: 1,000 lbs./454 kg. Weight: .45 lb./.20 kg.
   
Ancra Truck & Trailer Fittings - 45545-15

Ancra

TRUCK & TRAILER FITTINGS

Designed for low-profile mounting in trucks and trailers, the Recessed Pan Fitting is tensioned to reduce ring movement, but allows easy lifting. The Stake Pocket Anchor can be surface or flush mounted and accepts roll cart lock pins.

  • 45545-15 With black trim collar. WLL: 530 lbs./240 kg. Weight: .30 lb./.14 kg.
   
Ancra Truck & Trailer Fittings 49371-10

Ancra

TRUCK & TRAILER FITTINGS

Designed for low-profile mounting in trucks and trailers, the Recessed Pan Fitting is tensioned to reduce ring movement, but allows easy lifting. The Stake Pocket Anchor can be surface or flush mounted and accepts roll cart lock pins.

  • 49371-10 Stake Pocket Anchor. Conforms to USPS drawing B-13956. Black Lacquer Finish. Weight: 0.98 lb./.44 kg.
   
Ancra Truck and Trailer Fittings - Recessed Pan Fitting

Ancra

TRUCK & TRAILER FITTINGS

Designed for low-profile mounting in trucks and trailers, the Recessed Pan Fitting is tensioned to reduce ring movement, but allows easy lifting. The Stake Pocket Anchor can be surface or flush mounted and accepts roll cart lock pins.

  • 45849-13 Recessed Pan Fitting. WLL: 1,666 lbs./757 kg. Weight: 1.20 lbs./.55 kg.
   
Ancra Transmat Friction Mat

Ancra

TRANSMAT® FRICTION MAT

These durable rubber mats offer stability to any load and reduce risk of load shifting in box cars or intermodal transport.

  • Coefficient of friction of 1.2 min
  • Shore A hardness of 35-55 points
  • Meets new minimum 1g loading regulations
  • 49382-10 Sheet 30" x 42" 2mm thick
  • 49382-11 Roll 30" x 1900' 2mm thick
  • 49382-13 30" x 7' 2mm thick display packaged